7
3-2 Checking the Operation Condition of the Air Conditioner
When you login correctly using the Login Screen, the screen used to monitor the operation conditions of air
conditioner and general equipment groups will appear. If you wish to operate an air conditioner or general
equipment, click the group icon to switch to the operation screen.
Note: The operation condition display will not update automatically. If you wish to view the very latest condition, click [Update] on
each screen.
Item Description
Update to most recent
condition
Click [Update] to ensure the displayed items reflect the most recent operation condition.
Batch Operation Click [Batch Operation] if you want to perform an operation on all groups at once.
Group icon
The operation condition is indicated by the icon that is displayed. When you point to a group
icon with the mouse cursor, the group name is displayed. To switch to the operation screen,
click on the icon. The icons used to indicate the operation condition are shown below.
(1) Air conditioner group operation condition
(2) Ventilator (Lossnay) group operation condition
ON OFF Error Filter sign
Interlocked
ventilator ON
Interlocked
ventilator OFF
Schedule set Energy saving
Note: Other than 4-aiflow icons, 2-airflow or ceiling-suspended icons are also available.
Select the icon type on Initial Setting Web.
ON OFF Error Filter sign
Schedule set Energy saving
Batch operation
Click to perform an operation
on all groups at once.
Update to most recent
condition
Click to update the screen so
that the most recent condition is
shown.
Group icons
These icons are used to
indicate the operation condition
of an air conditioner or a
general equipment group.
Switch to the operation screen
by clicking the icon.
Set temperature display
The set temperature is
displayed here.
Room temperature display
The temperature of the
indoor unit’s intake is
displayed here.
Operation mode display
The operation mode is
displayed here.
To Next Page
Loading...
