4MELFA-BASIC V
Detailed explanation of command words 4-243
[Related system variables]
M_In/M_Inb/M_In8/M_Inw/M_In16 (900s number), M_Out/M_Outb/M_Out8/M_Outw/M_Out16 (900s num-
ber), M_HndCq
[Related instructions]
Loadset (Load Set), Oadl (Optimal Acceleration)
[Related parameter]
HANDTYPE, HANDINIT
Refer to Page 482, "5.10 Automatic return setting after jog feed at pause"and, Page 485, "5.13 About
default hand status".
To Next Page
Loading...
