5-462 Operation parameter
5Functions set with parameters
Behavior selection
of the [RESET]
key input at the
error occurrence
on dual system
*Available soft-
ware versions
S/W Ver.
F-Q series:
R6b or later
F-D series:
S6b or later
CATEGORY Integer 1
Set the behavior of the [RESET] key input at the error
occurrence on dual system.
3: Enable the error reset
4: Disable the error reset
Target errors are following.
H0039 (Door Switch Signal line is faulty.)
H0046 (Faulty wiring (Enabling Device).)
H0051 (Wiring of the external emergency stop is abnormal.)
3
Parameter
Parameter
name
No. of arrays
No. of characters
Details explanation Factory setting
To Next Page
Loading...
