Appendix-652 Spline interpolation
7Appendix
The Spline file manager screen is made up of two areas used for copying and deleting spline files, and for
changing spline numbers.
■Copy the spline file
By selecting the check box for spline file displayed at the source and then clicking the [Copy] button, the
selected spline file is copied to the destination. If a spline file with the same number exists in the destination,
the spline No. can be changed and copied.
Fig.7-71:File copy on the Spline file manager screen
Fig.7-72:Renumber & Copy
■Delete the spline file
By selecting the file to be deleted from the source or destination spline file list and then clicking the [Delete]
button, the selected spline file can be deleted.
Fig.7-73:Delete the spline file
To Next Page
Loading...
