Mitsubishi Electric MELSEC iQ-F FX5 - Chapter 1 Function Block (Fb) List

2
1 FUNCTION BLOCK (FB) LIST
1 FUNCTION BLOCK (FB) LIST
This chapter lists the FBs for the MELSEC iQ-F series analog input module (FX5-4AD), multiple input module (FX5-8AD),
analog output module (FX5-4DA).
Analog input module, Multiple input module FB
■FX5-4AD
*1 Note that this reference does not describe the FB version information which is displayed such as "_00A" at the end of FB name.
■FX5-8AD
*1 Note that this reference does not describe the FB version information which is displayed such as "_00A" at the end of FB name.
Analog output module FB
■FX5-4DA
*1 Note that this reference does not describe the FB version information which is displayed such as "_00A" at the end of FB name.
Name
*1
Description
M+FX5-4AD_RequestSetting Enables the settings of each function.
M+FX5-4AD_OperateError Monitors error codes and resets errors.
M+FX5-4AD_SetLoggingParam Sets up the logging function of a specified channel.
Name
*1
Description
M+FX5-8AD_RequestSetting Enables the settings of each function.
M+FX5-8AD_OperateError Monitors error codes and resets errors.
M+FX5-8AD_SetLoggingParam Sets up the logging function of a specified channel.
Name
*1
Description
M+FX5-4DA_RequestSetting Enables the settings of each function.
M+FX5-4DA_OperateError Monitors error codes and resets errors.
M+FX5-4DA_WaveOutputSetting Sets the wave output of a specified channel or all channels.
M+FX5-4DA_WaveOutputReqSetting Specifies whether to start, stop, or pause the wave output of a specified channel or all channels.