Mitsubishi Electric MELSEC iQ-F FX5 - M+FX5-4 Da_Waveoutputreqsetting

3 ANALOG OUTPUT MODULE FB
3.4 M+FX5-4DA_WaveOutputReqSetting
19
3
3.4 M+FX5-4DA_WaveOutputReqSetting
Name
M+FX5-4DA_WaveOutputReqSetting
Overview
Labels
■Input label
■Output label
Item Description
Overview Specifies whether to start, stop, or pause the wave output of a specified channel or all channels.
Symbol
No. Variable name Name Data type Range Description
(1) i_bEN Execution command Bit ON, OFF ON: The FB is activated.
OFF: The FB is not activated.
(2) i_stModule Module label Structure The setting range
differs depending on
the module label.
Specifies the module label for the analog output
module.
(3) i_uCH Target channel Word [Unsigned] 1 to 4, 15 • 1 to 4: The corresponding channel number is
specified.
• 15: All channels are specified.
(4) i_uStartStopReq Waveform output
start/stop request
Word [Unsigned] 0: Waveform output
stop request
1: Waveform output
start request
2: Waveform output
pause request
Specifies a start or stop request for the wave output.
(5) i_uUnitType Module type Word [Unsigned] 0: FX5-4DA Specifies a module type.
No. Variable name Name Data type Default value Description
(6) o_bENO Execution status Bit OFF ON: The execution command is ON.
OFF: The execution command is OFF.
(7) o_bOK Normal completion Bit OFF The on state indicates that the execution of the FB is
normal.
(8) o_uWaveStatusCH1 CH1 Wave pattern
output state monitor
Word [Unsigned] 0 Outputs the value of the wave output status (stopped,
output, or paused).
0: Waveform output stopped
1: Waveform output
2: Waveform output paused
3: Waveform output step execution
The FB is not capable of executing the wave output
step action function.
To execute the function, use the device/buffer memory
batch monitor of GX Works3.
For details, refer to MELSEC iQ-F FX5 User's
Manual (Analog Control - Intelligent function module).
(9) o_uWaveStatusCH2 CH2 Wave pattern
output state monitor
Word [Unsigned] 0
(10) o_uWaveStatusCH3 CH3 Wave pattern
output state monitor
Word [Unsigned] 0
(11) o_uWaveStatusCH4 CH4 Wave pattern
output state monitor
Word [Unsigned] 0
(9)
(8)
(7)
(6)
(3)
(2)
(1)
o_uWaveStatusCH2
o_uWaveStatusCH1
o_bOK
o_bENO
UW
UW
B
B
UW
DUT
B
:
:
:
:
(13)
(12)
(11)
(10)
o_uErrId
o_bErr
o_uWaveStatusCH4
o_uWaveStatusCH3
UW
B
UW
UW
:
:
:
:
:
:
:
i_uCH
i_stModule
i_bEN
(5)
(4)
UW
UW
:
:
i_uUnitType
i_uStartStopReq
M+FX5-4DA_WaveOutputReqSetting