Mitsubishi Electric MELSEC iQ-F FX5 - M+FX5-4 Da_Waveoutputsetting

16
3 ANALOG OUTPUT MODULE FB
3.3 M+FX5-4DA_WaveOutputSetting
3.3 M+FX5-4DA_WaveOutputSetting
Name
M+FX5-4DA_WaveOutputSetting
Overview
Labels
■Input label
Item Description
Overview Sets the wave output of a specified channel or all channels.
Symbol
No. Variable name Name Data type Range Description
(1) i_bEN Execution command Bit ON, OFF ON: The FB is activated.
OFF: The FB is not activated.
(2) i_stModule Module label Structure The setting range
differs depending on
the module label.
Specifies the module label for the analog output
module.
(3) i_uCH Target channel Word [Unsigned] 1 to 4, 15 • 1 to 4: The corresponding channel number is
specified.
• 15: All channels are specified.
(4) i_uOutputSelect Output selection
during waveform
output stop
Word [Unsigned] 0: 0 V/0 mA
1: Offset value
2: Output setting
value during
waveform output
stop
Specifies the output value during wave output stop.
(5) i_wOutputValue Output setting value
during waveform
output stop
Word [Signed] ■When an output
range is 0 to 5 V, 1 to
5 V, 0 to 10 V, 0 to 20
mA, or 4 to 20 mA
0 to 32767
■When an output
range is -10 to 10 V
-32768 to +32767
Sets the value to be output when 2 (Output setting
value during waveform output stop) is selected in the
output selection during waveform output stop.
(6) i_udStartingAddr Waveform pattern
start address setting
Double word
[Unsigned]
10000 to 89999 Sets the start address of a wave pattern to be output.
(7) i_udPointsSetting Number of waveform
pattern points setting
Double word
[Unsigned]
1 to 80000 (point) Sets the number of data points of a wave pattern to be
output.
(8) i_wFrequency Number of waveform
outputs setting
Word [Signed] -1: Infinite repetition
output
1 to 32767: Specified
number of times
output
Sets the number of output times of a wave pattern.
(14)
(13)
(12)
(11)
(3)
(2)
(1)
o_uErrId
o_bErr
o_bOK
o_bENO
UW
B
B
B
UW
DUT
B
:
:
:
:
:
:
:
i_uCH
i_stModule
i_bEN
(5)
(4)
W
UW
:
:
i_wOutputValue
i_uOutputSelect
(7)
(6)
UD
UD
:
:
(8) W : i_wFrequency
i_udPointsSetting
i_udStartingAddr
(10)
(9)
UW
UW
:
:
i_uUnitType
i_uConvSpeed
M+FX5-4DA_WaveOutputSetting