Mitsubishi Electric MELSEC iQ-F Series - Page 102

100
APPX
Appendix 1 Instruction Replacement List
Instruction Replacement List of ST Programs
■Replaced instructions
The following instructions will be replaced to GX Works3 compatible instructions when converting the project.
FX3 Series  MELSEC iQ-F Remarks
OUT_T  OUT_T, OUTH, OUTHS
• When the timer is 1 ms, it will be
replaced to the OUTHS instruction.
• When the timer is 10 ms, it will be
replaced to the OUTH instruction.
• When the timer is 100 ms, it will be
replaced to the OUT_T instruction.
When a label is used instead of a
timer device, the instructions will not
be replaced.
*1
SQRP  SQRTP 
DSQR  DSQRT 
DSQRP  DSQRTP 
SER  SERMM 
SERP  SERMMP 
DSER  DSERMM 
DSERP  DSERMMP 
RAMP  RAMPF 
SORT  SORTTBL 
HEX  HEXA 
HEXP  HEXAP 
SORT2  SORTTBL2 
DSORT2  DSORTTBL2 
HOUR  HOURM 
DHOUR  DHOURM 
IVCK  IVCK SM4095 is added to parameters of
instructions. Change to an
appropriate device or label.
IVDR  IVDR
IVRD  IVRD
IVWR  IVWR
IVBWR  IVBWR
IVMC  IVMC
ADPRW  ADPRW
LOADR  ERREAD
*2

LOADRP  ERREAD
*2

RWER  ERWRITE
*2

RWERP  ERWRITE
*2

INITER  ERINIT
*2

INITERP  ERINIT
*2

SQR  SQRT_E These instructions will be converted
to standard functions.
LEN  LEN_E
RIGHT  RIGHT_E
LEFT  LEFT_E
LIMIT  LIMIT_E
DLIMIT  LIMIT_E
BOOL_TO_STR  BOOL_TO_STRING 
BOOL_TO_STR_E  BOOL_TO_STRING_E 
INT_TO_STR  INT_TO_STRING 
INT_TO_STR_E  INT_TO_STRING_E 
DINT_TO_STR  DINT_TO_STRING 
DINT_TO_STR_E  DINT_TO_STRING_E 
REAL_TO_STR  REAL_TO_STRING 
REAL_TO_STR_E  REAL_TO_STRING_E 
STR_TO_BOOL  STRING_TO_BOOL 