APPX
Appendix 1 Instruction Replacement List
101
A
*1 For GX Works3 version 1.032J and later, the instructions will be replaced when a timer device is assigned to the global label.
*2 These instructions are supported by GX Works3 version 1.040S and later.
■Instructions that are not supported by GX Works3
The following instructions are not supported by GX Works3. The instructions are left as is when converting the projects, but an
error will occur when compiling.
STR_TO_BOOL_E STRING_TO_BOOL_E
STR_TO_INT STRING_TO_INT
STR_TO_INT_E STRING_TO_INT_E
STR_TO_DINT STRING_TO_DINT
STR_TO_DINT_E STRING_TO_DINT_E
STR_TO_REAL STRING_TO_REAL
STR_TO_REAL_E STRING_TO_REAL_E
STR_TO_TIME STRING_TO_TIME
STR_TO_TIME_E STRING_TO_TIME_E
TIME_TO_STR TIME_TO_STRING
TIME_TO_STR_E TIME_TO_STRING_E
MAXIMUM MAX
MAXIMUM_E MAX_E
MINIMUM MIN
MINIMUM_E MIN_E
LIMITATION LIMIT
LIMITATION_E LIMIT_E
FX3 Series MELSEC iQ-F Remarks
OUT_C_32 OUT_C_32 Correct the program to use OUT_C
instruction.
IRET IRET
FEND FEND
DROR DROR Correct the program to use ROR_E
instruction.
DROL DROL Correct the program to use ROL_E
instruction.
FLT FLT Correct the program to use INT2FLT
instruction.
FLTP FLTP Correct the program to use
INT2FLTP instruction.
DFLT DFLT Correct the program to use
DINT2FLT instruction.
DFLTP DFLTP Correct the program to use
DINT2FLTP instruction.
REFF REFF Correct the program to use REF
instruction.
REFFP REFFP Correct the program to use REFP
instruction.
PLSR PLSR Correct the program to use DRVI
instruction. Set the acceleration/
deceleration time specified by the
PLSR instruction operand as the
acceleration time and deceleration
time of SD.
DPLSR DPLSR Correct the program to use DDRVI
instruction. Set the acceleration/
deceleration time specified by the
DPLSR instruction operand as the
acceleration time and deceleration
time of SD.
FX3 Series MELSEC iQ-F Remarks
To Next Page
Loading...
