Mitsubishi Electric MELSEC iQ-R R60TD8-G - PART NAMES

1 PART NAMES
15
1
1 PART NAMES
This chapter describes the part names of temperature input modules.
*1 For details, refer to the following.
 MELSEC iQ-R Channel Isolated Thermocouple Input Module/Channel Isolated RTD Input Module User's Manual (Application)
No. Name Description
(1) RUN LED Indicates the operating status of the module.
On: Normal operation
Flashing (1s cycle): In offset/gain setting mode
Flashing (400ms cycle): The module for online module change selected
Off: 5V power supply interrupted or watchdog timer error occurred, module change for online module
change possible
(2) ERR LED Indicates the error status of the module.
On: Error occurred
*1
Off: Normal operation
(3) ALM LED Indicates the alarm status of the module.
On: Alert (process alarm or rate alarm) issued
Flashing: Disconnection detected
Off: Normal operation
(4) Connector for external devices A connector for input signal wires of external devices and others
For the signal layout, refer to the following.
Page 24 Signal layout of connectors for external devices
(5) Production information marking Shows the product information (16 digits) of the module.
(2)(1)
(5)
(3)
(2)(1)
(5)
(3)
(4) (4)