Mitsubishi Electric MELSEC iQ-R R60TD8-G - Page 32

30
5 WIRING
5.2 External Wiring
RTD input module
Use the connector/terminal block converter module for the Q68RD3-G. Wire the modules as shown below.
*1 Ground the shields.
Product name Model Remarks Contact
Connector/terminal block converter module FA-LTB40RD3G  Your local Mitsubishi Electric sales office or
representative
Dedicated cable FA-CBL05Q68RD3G Cable length: 0.5m
FA-CBL10Q68RD3G Cable length: 1.0m
FA-CBL20Q68RD3G Cable length: 2.0m
FA-CBL30Q68RD3G Cable length: 3.0m
RTD input
module
Dedicated cable
Connector/terminal block
converter module
CH1 A1 (terminal 1)
CH1 B1 (terminal 2)
Shield
*1
Shield
*1
Shield
*1
CH1 b1 (terminal 3)