Mitsubishi Electric MELSEC iQ-R Series - Page 36

35
4 PROGRAMMABLE CONTROLLER SETTINGS
4.3 Recording Setting
Creating the recording setting
Use GX Works3 to configure the recording setting of the camera recorder module.
For details on the recording setting screen, refer to the following.
MELSEC iQ-R System Recorder User's Manual (Application)
There are two recording methods: "File Saving Trigger Only" and "Recording Startup Trigger + File Saving Trigger". The
following shows the setting example with the recording method using only the file saving trigger for recording data from 10
seconds before to 5 seconds after the device M0 turns on.
Operating procedure
1. Add a new recording setting.
[Navigation] window  [Parameter]  [Recording Setting]  Right-click  [New]
*1
*1 A new setting can also be created from the recording menu.
Setting item Description
Recording Setting Configure the settings required for recording.
■Settings
• Recording Method: File Saving Trigger Only
• Specify the Devices/Labels in the Program in a Batch: Select
•Device: M0
• Saving Path Setting: SD memory card
• Video Data Receiving Target Setting: Select all
Click here to configure
the recording setting.
Click here.