Mitsubishi Electric MELSEC iQ-R Series - Page 37

4 PROGRAMMABLE CONTROLLER SETTINGS
4.3 Recording Setting
36
4
2. Select a recording method in the saving period setting.
Recording Method: File Saving Trigger Only, Saving Period Before Trigger: 10 seconds, Saving Period After Trigger: 5
seconds
3. Configure the device/label sampling setting.
Specify the Devices/Labels Used in the Project as Sampling Targets: Select (by default)
Specify the Devices/Labels in the Program in a Batch: Select (by default)
When specifying the batch Devices/Labels in a program, the devices and labels in the created program are
automatically set as the sampling targets.
Ex.
The estimated processing time for
device/label sampling is displayed.
Ex.