Mitsubishi Electric melsec q03ud(E)cpu - Page 112

4 - 16
CHAPTER4 ASSIGNMENT OF BASE UNIT AND I/O NUMBER
1
2
3
4
5
6
7
8
4.2 I/O Number Assignment 4.2.3 I/O number setting example
(b) I/O assignment
Set "200" for the start XY of Slot 3 and "70" to Slot 4 in the I/O assignment setting of PLC parameter
in GX Developer.
Figure 4.15 I/O assignment setting (When changing I/O numbers of Slot 3)
Set "200" to start XY.
Set "70" to start XY.
(If not set, the I/O
number following the
slot 3 will be set.)