5 - 7
CHAPTER5 MEMORIES AND FILES USED FOR CPU MODULE
1
2
3
4
5
6
7
8
5.1 Memories Used for CPU Module
5.1.2 Program memory
(3) Writing to the program memory
Select [Online] [Write to PLC] in GX Developer.
Select "Program memory/Device memory" in “Target memory” on the Write to PLC screen.
The file size has its minimum unit. ( Section 5.3.4)
The occupied memory capacity may be greater than the actual file size.
Note that as the number of files increases, the difference between the occupied memory capacity and the actual file size
increases.
Figure 5.4 Write to PLC screen
To Next Page
Loading...
