CHAPTER6 FUNCTIONS
1
2
3
4
5
6
7
8
6.12 Writing Programs While CPU Module is in RUN Status
6.12.1 Online change (ladder mode)
6 - 59
This function also can write programs by GX Developer connected to another station on the network.
(2) Memory for online change
A program cache memory (program memory) is available.
(3) Number of steps that can be batch-written by online change
Up to 512 steps can be batch-written.
Figure 6.51 Outline of online change via network
MELSECNET/H
PLC-to-PLC network
Change a program with GX Developer and
write it to the CPU module in the RUN status.
GX Developer
To Next Page
Loading...
