8 - 10
CHAPTER8 PARAMETERS
1
2
3
4
5
6
7
8
8.1 PLC Parameters
(7) Boot file
Parameters required for a boot from a memory card are set.
Figure 8.7 Boot file
Table8.7 Boot file setting list
Item
Parameter
No.
Description Setting range Default Reference
Boot option
Clear program
memory
7000
H
Select whether to clear the
program memory at the time of
boot.
Selected/deselected Deselected
Section 5.1.8
Boot file setting
Set the type and data name of
the boot file, and transfer source
drive for boot operation.
Type, "Data name, and Transfer
from (the transfer target drive
(Transfer to) is automatically set
in the program memory.)
Blank
To Next Page
Loading...
