Mitsubishi Electric melsec q03ud(E)cpu - Page 339

8 - 19
Table8.13 Built-in Ethernet port setting list (continued)
Item
Parameter
No.
Description Setting range Default Reference
Open settings
1016
H
Set data when using MC protocol or
socket communication.
-
Blank
QnUCPU
Userís Manual
(Communicati
on via Built-in
Ethernet Port)
FTP settings
Set data when using the file transfer
function (FTP).
-
Blank
Time settings
Set data when using the time
setting function.
-
Blank
Enable online
change (FTP, MC
protocol)
Enable or disable writing data in
devices or files to the running CPU
module when MC protocol or FTP is
used.
Selected/deselected Deselected
Disable direct
connection to
MELSOFT
Enable or disable direct connection
to MELSOFT.
To enhance the security with the
remote password setting, check it to
disable it.
Selected/deselected Deselected
Do not respond to
search for CPU
(Built-in Ethernet
port) on network
Checking this box disables
response to the find CPU function
of the MELSOFT connection.
To enhance the security, check it to
disable this.
Selected/deselected Deselected