Mitsubishi Electric melsec q03ud(E)cpu - Page 341

8 - 21
(1) CC-Link IE controller network setting
Network parameters for the CC-Link IE controller network are set.
Figure 8.14 Setting the number of Ethernet/CC IE/MELSECNET cards (CC-Link IE controller network setting)
Table8.16 CC-Link IE controller network setting list
Item Parameter No. Description Setting range Default Reference
Number of modules on CC-Link IE
controller network
A000
H
Set network parameters for
the CC-Link IE controller
network.
Refer to the manual for the
CC-Link IE controller
network.
--
Starting I/O No.
ANM0
H
Network No.
Total stations
Station No.
Group No. 0Amn
H
Mode ANM0H
Refresh parameters ANM1H
Common parameters ANM2H
Station inherent parameters ANM3H
Interlink transmission parameters A002H
Routing parameters 5003H