11 - 2
CHAPTER11 PROCEDURES FOR WRITING PROGRAM TO CPU MODULE
1
2
11
4
5
6
7
8
11.1 Items to be Considered for Creating Programs
(4) Setting the applications of devices and the number of device points
Consider the applications of devices and the number of device points used in the program.
( CHAPTER 9)
(5) Setting the initial device value
Set data necessary as an initial value to the device memory and the buffer memory of the intelligent
function module.
( Section 6.25)
(6) Setting boot operation
When storing a program to the memory card, execute the program after boot operation.
For boot operation, make the setting in the Boot file tab of the PLC parameter dialog box.
( Section 5.1.8, Section 5.1.10)
To Next Page
Loading...
