Mitsubishi Electric melsec q03ud(E)cpu - Page 564

1
2
3
APPEN-
DIX
6
7
8
Appendix 3 Method of Replacing Basic Model QCPU or High Performance Model QCPU with Universal
Model QCPU
Appendix 3.2 Applicable devices and software
APPENDICES
App - 20
*1: The serial number (first five digits) of the MELSECNET/H module must be "10042" or later if all conditions 1) to 4) described below are
satisfied.
1) A multiple CPU system including Built-in Ethernet port QCPU is configured.
2) GX Developer or GOT is connected to an Ethernet port of the Built-in Ethernet port QCPU.
3) GX Developer or GOT accesses the CPU module on another station via the MELSECNET/H module controlled by another CPU.
4) The access target on another station is A/QnA series CPU module.
TableApp.20 Product need to be replaced (Network module and serial communication module)
Product Model
Module version compatible with the Universal model QCPU
Used with Q00UJ/Q00U/Q01U/Q02U/
Q03UD/Q04UDH/Q06UDH/Q10UDH/
Q13UDH/Q20UDH/Q26UDHCPU
Used with Built-in Ethernet port QCPU
MELSECNET/H model
• QJ71LP21-25
• QJ71LP21S-25
• QJ71LP21G
• QJ71BR11
No restrictions
Some restrictions depending on use
conditions
*1
Serial communication module
• QJ71C24N
• QJ71C24N-R2
• QJ71C24N-R4
Serial number (first five digits) "10042" or
later
Modem interface module • QJ71CMON