Mitsubishi Electric MELSERVO-J5 HK Series - Page 58

56
4 CONNECTING THE SERVO AMPLIFIER AND ROTARY SERVO MOTOR
4.3 Selection example of wires
HK-KT series
*1 For the motor power connector wiring, use fluorine resin wire of 0.75 mm
2
(AWG 18).
*2 This applies when the wire length is 10 m or less. When fabricating an extension cable, use 1.25 mm
2
(AWG 16).
*3 For wiring of the electromagnetic brake, use fluorine resin wire of 0.2 mm
2
(AWG 24).
HK-ST series
Rotary servo motor Wire [mm
2
]
1) U/V/W/E 2) B1/B2
HK-KT053W 0.75 (AWG 18)
*1 *2
0.2 (AWG 24)
*2 *3
HK-KT13W
HK-KT1M3W
HK-KT13UW
HK-KT23W
HK-KT43W
HK-KT63W
HK-KT23UW
HK-KT43UW
HK-KT7M3W
HK-KT103W
HK-KT7M3UW
HK-KT103UW
HK-KT153W
HK-KT203W
HK-KT202W
HK-KT434W
HK-KT634W
HK-KT7M34W
HK-KT1034W
HK-KT1534W
HK-KT2034W
HK-KT2024W
Rotary servo motor Wire [mm
2
]
1) U/V/W/E 2) B1/B2
HK-ST52W 1.25 (AWG 16) 1.25 (AWG 16)
HK-ST102W 1.25 (AWG 16)
HK-ST172W 2 (AWG 14)
HK-ST202AW 2 (AWG 14)
HK-ST302W 2 (AWG 14)
HK-ST202W 2 (AWG 14)
HK-ST352W 3.5 (AWG 12)
HK-ST502W 8 (AWG 8)
HK-ST702W 8 (AWG 8)
HK-ST524W 1.25 (AWG 16)
HK-ST1024W 1.25 (AWG 16)
HK-ST1724W 1.25 (AWG 16)
HK-ST2024AW 1.25 (AWG 16)
HK-ST3024W 1.25 (AWG 16)
HK-ST2024W 1.25 (AWG 16)
HK-ST3524W 2 (AWG 14)
HK-ST5024W 3.5 (AWG 12)
HK-ST7024W 3.5 (AWG 12)