To Next PageTo Next PageWhat to do if my Mitsubishi Electric Amplifier shows a memory error 1 (RAM)?
If your Mitsubishi Electric Amplifier displays a memory error 1 (RAM), it could be due to a RAM error. Try pressing the 'SET' button on the current alarm screen.
What to do if my Mitsubishi Electric MELSERVO-JE MR-JE-70A Amplifier shows a memory error 2 (EEP-ROM)?
If you encounter a memory error 2 (EEP-ROM) on your Mitsubishi Electric Amplifier, especially at power on, it might be due to an EEP-ROM error. In this case, try pressing the 'SET' button on the current alarm screen.
General| Model | MR-JE-70A |
|---|---|
| Series | MELSERVO-JE |
| Rated Output Power | 0.75 kW |
| Rated Output Current | 5.0 A |
| Safety Function | STO (Safe Torque Off) |
| Type | Servo Amplifier |
| Power Supply Voltage | 200-240 VAC |
| Power Supply Voltage (Alternative) | Single-phase 200-230 VAC |
| Feedback System | Incremental encoder |
| Communication | USB |
| Protective Functions | Overcurrent, overload, overvoltage, undervoltage, overspeed, encoder error, etc. |
| Ambient Temperature | 0 °C to 55 °C |
| Ambient Humidity | 90% RH or less (non-condensing) |
| Vibration Resistance | 5.9 m/s² (0.6 G) |
| Weight (Alternative) | 2.2 kg |
