To Next PageTo Next PageHow to troubleshoot a board error on Mitsubishi Electric MR-J4-10B(-RJ)?
If your Mitsubishi Electric Servo Drives are showing a board error, it indicates a fault with one of the boards. Replace the faulty board.
What to do if Mitsubishi Electric MR-J4-10B(-RJ) Servo Drives report a control process error?
If your Mitsubishi Electric Servo Drives have a control process error, investigate control process configuration.
General| Series | MR-J4 |
|---|---|
| Type | Servo Drive |
| Model | MR-J4-10B(-RJ) |
| Position Control | Yes |
| Speed Control | Yes |
| Torque Control | Yes |
| Communication Interface | SSCNET III/H |
| Category | Servo Drive |
| Rated Output | 0.1 kW |
| Power Supply Voltage | Single-phase AC200 V to 240 V, 50/60 Hz |
| Voltage Class | 200V |
| Control Method | current control system |
| Position Control Function | Yes |
| Speed Control Function | Yes |
| Torque Control Function | Yes |
| Feedback System | Incremental encoder, Absolute encoder |
| Safety Function | STO (Safe Torque Off) |
| Protection Functions | Overload, Overvoltage, Undervoltage |
| Ambient Temperature | 0 °C to 55 °C |
| Ambient Humidity | 90% RH or less (non-condensing) |
| Vibration Resistance | 5.9 m/s2, 10 Hz to 55 Hz |
