Mitsubishi Electric PAR-33MAA User Manual

5. Restriction
Button operation
F1 F2 F3 F4
Restriction
Setting display:
Page
Operation locked No
On/Off Mode Set temp.
Vane
F1 F2 F3 F4
Restriction
Restriction
Select:
Cursor Cursor
Main menu:
Locked
Locked
Locked
Locked
Operation locked No / Yes
On/Off
Mode
Set temp.
Vane
Operation locked Yes
On/Off Mode Set temp.
Vane
Changes saved
Cool
Room
AutoSet temp.
Mode Fan
Fri
[
2
]
The screen to make the settings for the operation lock function will appear.
Move the cursor to the desired item with the F1
or F2 button out of "Op-
eration locked", "On / Off", "Mode", "Set temp.", or "Vane".
Change the settings with the F3
or F4 button.
[
1
]
Bring up the Restriction setting screen. (refer to D-37)
Move the cursor to "Operation locked" and press the
button.
will appear on the Main display
in the Full mode when the operation
lock function setting is enabled.
Operation guide that corresponds
to the locked function will be sup-
pressed.
Press the button to save the settings.
A conrmation screen will appear.
5.2. Operation lock function
(When Set temp. is locked)
• Operation locked: No (disable) / Yes (enable)
• On / Off: On/Off operation
• Mode: Operation mode setting
– / Locked
• Set temp.: Preset temp. setting
• Vane: Vane setting
• To enable the operation lock function, set the item "Operation locked" to "Yes".
• The On / Off operation, Operation mode setting, Preset temp, Setting and Vane Setting operations can all be restricted.
Navigating through the screens
• To go back to the Main menu ..................
button
• To return to the previous screen ...............
button
P
Cool
Room
AutoSet temp.
Mode Fan
Fri
Operation locked
"Operation locked" will appear
if operation is attempted in the
"Operation locked" state.
MA REMOTE CONTROLLER
6
. CONTROLLER OPERATION-FUNCTION SETTINGS [PAR-33MAA]
D-39
MA REMOTE CONTROLLER

Mitsubishi Electric PAR-33MAA Specifications

General

Brand	Mitsubishi Electric
Model	PAR-33MAA
Category	Remote Control
Language	English