Mitsubishi Electric PAR-33MAA User Manual

6. Auto mode setting
F1 F2 F3 F4
Auto mode
Auto mode Yes / No
Select:
Cursor
Button operation
[
1
]
Move the cursor to the "Auto mode" with the F1 or F2 button, and press
the
button.
Select "Initial setting" from the Main menu (refer to D-15), and press
the
button.
[
2
]
Change the setting with the
F3
or
F4
button.
Press the
button to save the changes mode.
Navigating through the screens
• To go back to the Main menu ..................
button
• To return to the previous screen ...............
button
Whether or not to use the Auto (single set point) or Auto (dual set points) mode can be selected by using the
F3
or
F4
but-
ton.
Auto mode setting : The factory default setting is "Yes".
• Yes: The AUTO mode can be selected in the operation mode setting.
• No: The AUTO mode cannot be selected in the operation mode setting.
P
F1 F2 F3 F4
Cursor Page
Initial setting menu
Main menu:
Auto mode
Administrator password
Language selection
Daylight saving time
MA REMOTE CONTROLLER
8
. INITIAL SETTING [PAR-33MAA]
D-55
MA REMOTE CONTROLLER

Mitsubishi Electric PAR-33MAA Specifications

General

Brand	Mitsubishi Electric
Model	PAR-33MAA
Category	Remote Control
Language	English