How to fix water leakage from Mitsubishi Electric PUHY-(E)P450YHM-A Air Conditioner?
If you notice water leaking from your Mitsubishi Electric Air Conditioner, inspect the drainage lines for any clogs. Also, ensure that the unit was properly installed.
What to do if Mitsubishi Electric PUHY-(E)P450YHM-A discharge air temperature is abnormal?
If you observe an abnormal discharge air temperature in your Mitsubishi Electric Air Conditioner, inspect the refrigerant levels and ensure that the compressor is functioning properly.
How to troubleshoot abnormal high pressure in Mitsubishi Electric Air Conditioner?
If you notice abnormal high pressure in your Mitsubishi Electric Air Conditioner, check the system for blockages and ensure proper airflow.
What causes abnormal low pressure in Mitsubishi Electric PUHY-(E)P450YHM-A Air Conditioner?
If you observe abnormal low pressure in your Mitsubishi Electric Air Conditioner, verify the refrigerant charge and check for any leaks.
How to fix heatsink overheat protection on Mitsubishi Electric Air Conditioner?
If the heatsink on your Mitsubishi Electric Air Conditioner is overheating, check the airflow around the heatsink and clean any dust build-up.
How to fix temperature sensor failure in Mitsubishi Electric PUHY-(E)P450YHM-A Air Conditioner?
If the temperature sensor fails in your Mitsubishi Electric Air Conditioner, replace the malfunctioning temperature sensor.
What to do if drain pump fails in Mitsubishi Electric PUHY-(E)P450YHM-A Air Conditioner?
If the drain pump fails in your Mitsubishi Electric Air Conditioner, check the drain pump for blockages and replace it if necessary.
How to troubleshoot RPM error or motor malfunction in Mitsubishi Electric Air Conditioner?
If you are experiencing an RPM error or motor malfunction with your Mitsubishi Electric Air Conditioner, inspect the motor and RPM sensors for faults.
What to do for drain pump failure or float switch trip in Mitsubishi Electric PUHY-(E)P450YHM-A?
If the drain pump fails or the float switch trips on your Mitsubishi Electric Air Conditioner, reset the float switch and check the drainage system.
How to fix IPM error in Mitsubishi Electric Air Conditioner?
If you encounter an IPM error with your Mitsubishi Electric Air Conditioner, inspect the inverter for faults and replace it as necessary.
General| Model | PUHY-(E)P450YHM-A |
|---|---|
| Cooling Capacity | 45.0 kW |
| Heating Capacity | 50.0 kW |
| Refrigerant | R410A |
| Operating Temperature Range (Cooling) | -5°C to 46°C |
| Sound Pressure Level (Outdoor Unit) | 62 dB(A) |
| Type | VRF (Variable Refrigerant Flow) |
| Power Supply | 380-415V, 50Hz |
| Operating Temperature Range (Heating) | -20°C to 15.5°C |
| Series | City Multi Y Series |
Check refrigerant type, symptoms, safety precautions, tools, pipes, and ventilation.
Lists tools for R410A, those usable with restrictions, and those that must not be used.
Details copper pipe types, radial thickness, and flare processing dimensions for R410A.
Compares chemical and pressure characteristics of R410A with conventional refrigerants like R22.
Summarizes compatible indoor units and outdoor units, including capacity and model types.
Detailed wiring diagram for outdoor units, showing component connections and terminal blocks.
Schematic diagrams of the refrigerant circuit for different outdoor unit models.
Explains the functions and factory settings of DIP switches on the outdoor unit's control board and INV board.
Lists essential checks before performing a test run, including refrigerant leak, insulation resistance, and power supply.
Provides step-by-step instructions for conducting a test run using the MA remote controller.
Comprehensive list of error codes, their preliminary codes, definitions, and affected units.
Explains how to interpret and respond to specific error codes displayed on the remote controller.
Instructions for locating refrigerant leaks in both indoor and outdoor units during cooling and heating seasons.
Step-by-step guide for safely removing and replacing the compressor components.
Explains how to interpret the 4-digit 7-segment LED displays for numerical values and flag displays.
To Next Page