106
(b) Redundant power supply system
•Q64RPN
*1 The operation of the ERR terminal is as follows:
<When the redundant power supply module is mounted on the redundant power main base unit>
The terminal turns off (opens) when the AC power is not input, a CPU module stop error (including a reset) occurs, the
redundant power supply module fails, or the fuse of the redundant power supply module is blown.
<When the redundant power supply module is mounted on the redundant power extension base unit>
The terminal turns off (opens) when the AC power is not input, the redundant power supply module fails, or the fuse of
the redundant power supply module is blown.
*2 When input power is supplied to the redundant power supply module mounted on the redundant power main base unit
and the redundant power supply module mounted on the redundant power extension base unit simultaneously, the ON
(short) timing of the ERR
terminal on the redundant power main base unit is later than that of the ERR terminal on the
redundant power extension base unit by the initial processing time of the CPU module.
*3 Ground the LG and FG terminals by using a ground wire as thick and short as possible (2mm in diameter).
AC
100V/200VAC
AC
100V/200VAC
FG
*3
LG
*3
Ground wire
Extension cable
Grounding
CPU module
I/O module
FG
*3
LG
*3
INPUT
Redundant power main base unit
(Q38RB)
Redundant power extension
base unit (Q68RB)
FG
*3
LG
*3
INPUT
INPUT INPUT
FG
*3
LG
*3
AC
100V/200VAC
AC
100V/200VAC
System BSystem A
ERR
*1, *2
ERR
*1, *2
ERR
*1, *2
ERR
*1, *2
Ground wire
Grounding
Q64RPN Q64RPN
Q64RPN Q64RPN
100-240VAC 100-240VAC
100-240VAC 100-240VAC
To Next Page
Loading...
