135
CHAPTER 6 CPU MODULE
6
6.1 Part Names
6.1.3 Universal model QCPU
*1 When leaving a cable connected to a USB connector or RS-232 connector, clamp the cable to prevent a poor
connection, moving, and disconnection by unintentional pulling.
The Q6HLD-R2 type RS-232 connector disconnection prevention holder is available as a clamp for the RS-232
connector.
*2 Operate the RUN/STOP/RESET switch with your fingertips.
To prevent the switch from being damaged, do not use any tool such as screw driver.
14) Module fixing projection Projection used to secure the module to the base unit.
15) Module mounting lever
Lever used to mount the module to the base unit.
No. Name Application
Fixing screw
Q6HLD-R2
CPU module
RS-232 cable
To Next Page
Loading...
