138
*1 When a cable is connected to the USB connector and RS-232 connector at all times, clamp the cable to prevent a poor
connection, moving, and disconnection by unintentional pulling. The Q6HLD-R2 type RS-232 connector disconnection
prevention holder is available as a clamp for RS-232 connector.
*2 Operate the RUN/STOP/RESET switch with your fingertips. To prevent the switch from being damaged, do not use any
tool such as screw driver.
16) Battery connector pin
For connection of battery lead wires.
(Lead wires are disconnected from the connector when shipping to prevent the battery from
consuming.)
17) Battery Backup battery for use of standard RAM and backup power time function.
18) Module mounting lever Lever used to mount the module to the base unit.
No. Name Application
Fixing screw
Q6HLD-R2
CPU module
RS-232 cable
To Next Page
Loading...
