179
CHAPTER 6 CPU MODULE
6
6.2 Specifications
6.2.5 Universal model QCPU
*8 This is the number of connectable nodes when a repeater hub is used. For the number of connectable nodes when a
switching hub is used, contact the manufacturer of the switching hub used.
*9 The number is a total of TCP/IP and UDP/IP.
For the general specifications, refer to Page 117, CHAPTER 5.
Item
Universal model QCPU
Q03UDVCPU Q04UDVCPU Q06UDVCPU Q13UDVCPU Q26UDVCPU
Intelligent function module device
Device for accessing the buffer memory of the intelligent function module directly.
Specified form: U\G
Specifications
of Ethernet
port built in
the CPU
module
Data transmission speed 100/10Mbps
Communication mode Full-duplex/Half-duplex
Transmission method Base band
Max. distance between hub
and node
100m
Max.
number of
connectable
nodes
10BASE-T
Cascade connection: Up to four bases
*8
100BASE-
TX
Cascade connection: Up to two bases
*8
Number of connections
*9
16 for a total of socket communication, MELSOFT connection, and MC protocol,
and 1 for FTP
Latch range
L0 to 8191 (8192 points by default)
(Latch range can be set up for B, F, V, T, ST, C, D, and W.) (Setting by parameters)
RUN/PAUSE contact
One contact can be set up in X0 to 1FFF for each of RUN and PAUSE.
(Setting by parameters)
Clock function
Year, month, date, hour, minute, second, and day of the week
(Automatic leap year detection)
Accuracy: -2.97 to +3.75s (TYP.+0.39s)/d at 0°C
Accuracy: -2.97 to +3.75s (TYP.+0.39s)/d at 25°C
Accuracy: -12.77 to +2.13s (TYP.-5.32s)/d at 55°C
Allowable momentary power failure time Varies depending on the power supply module.
5VDC internal current consumption 0.58A (only CPU module), 0.6A (with an extended SRAM cassette)
External dimensions
H 98mm
W 27.4mm
D115mm
Weight 0.20kg
To Next Page
Loading...
