Mitsubishi Electric Q13UDVCPU - Page 428

426
41BF
H
Ethernet I/F
Error
When "MELSEC-A (Ethernet Module)/MELSEC-
FX3 (Ethernet Block/Adapter)" was specified in
"Destination" of the simple PLC communication
function, a system error occurred. (The possible
cause is malfunction due to noise or other
causes or hardware failure).
• Check that the power supply module and the
CPU module are mounted/connected properly.
• Ensure that the operating environment for the
system meets the general specifications of the
CPU module.
• Check whether the power capacity is sufficient.
• Reset the CPU module.
• Execute again. If the same error code is
displayed, the cause is a hardware failure of the
CPU module. Please consult your local
Mitsubishi representative.
LCPU
*2
41C1
H
File-related
error
The format information data of the specified drive
(memory) is abnormal.
The file information data may be corrupted.
After backing up the data in the CPU module,
format the CPU memory.
QCPU
LCPU
41C2
H
File-related
error
File open specification data for file access is
wrong.
Execute again after checking the specification
data.
QCPU
LCPU
41C3
H
File-related
error
Simultaneously accessible files exceeded the
maximum.
Execute again after decreasing file operations.
QCPU
LCPU
41C4
H
File-related
error
Simultaneously accessible files exceeded the
maximum.
Execute again after decreasing file operations.
QCPU
LCPU
41C5
H
File-related
error
• The specified file does not exist.
• The file does not exist in the valid drive.
• Execute again after checking the file.
• Execute again after checking that the file exists
in the valid drive.
QCPU
LCPU
41C7
H
File-related
error
The specified file or drive (memory) does not
exist.
Execute again after checking the file or drive
(memory).
QCPU
LCPU
41C8
H
File-related
error
The size of the specified file has exceeded that
of the existing file.
Execute again after checking the size of the
specified file.
If the error recurs after re-execution, the file
information data may be corrupted.
After backing up the data in the CPU module,
format the CPU memory.
QCPU
LCPU
41C9
H
File-related
error
Access to the file sector was unsuccessful.
The format information data of the target drive
(memory) is abnormal.
After backing up the data in the CPU module,
format the CPU memory.
QCPU
LCPU
41CA
H
File-related
error
Access to the file sector was unsuccessful.
The format information data of the target drive
(memory) is abnormal.
After backing up the data in the CPU module,
format the CPU memory.
QCPU
LCPU
41CB
H
File-related
error
The file name is specified in a wrong method. Execute again after checking the file name.
QCPU
LCPU
41CC
H
File-related
error
The specified file or subdirectory does not exist.
Execute again after checking the name of the file
and subdirectory.
QCPU
LCPU
41CD
H
File-related
error
An access inhibited with the attribute was made
to the file.
Or the file attribute was attempted to be changed
to the inhibited one.
Check the attribute and open mode of the file.
QCPU
LCPU
41CE
H
File-related
error
The file cannot be written because the specified
file is read-only.
The specified file is write-protected. Execute again
after checking the attribute.
QCPU
LCPU
41CF
H
File-related
error
The specified drive (memory) has been used
exceeding the capacity.
Execute again after checking the drive (memory)
capacity.
QCPU
LCPU
41D0
H
File-related
error
The specified drive (memory) has no free space.
Or the number of files in the directory of the
specified drive (memory) has exceeded the
maximum.
• Execute again after increasing the free space of
the drive (memory).
• Execute again after deleting file(s) in the drive
(memory).
QCPU
LCPU
41D1
H
File-related
error
• The file name is specified in a wrong method.
• The SD memory card is being disabled by
SM606 (SD memory card forced disable
instruction).
• Execute again after checking the file name. If
the error recurs after re-execution, the file
information data may be corrupted. After
backing up the data in the CPU module, format
the CPU memory.
• Cancel the SD memory card forced disable
instruction.
QCPU
LCPU
Error code
(Hexadecimal)
Error item Error details Corrective action
Corresponding
CPU