483
APPENDICES
A
Appendix 2 List of Special Relay Areas
*1 The following modules support these areas:
• Universal model QCPU whose serial number (first five digits) is "10102" or later
• Q00UJCPU, Q00UCPU, Q01UCPU
*2 The name, 1 minute clock, is for the special relay (M9034) of the ACPU.
*3 The QCPU and LCPU do not support the use of the A8UPU/A8PUJ.
*4 Modules whose serial number (first five digits) is "16112" or later
M9196 SM1196 SM325
Operation
output at block
stop
OFF: Coil output OFF
ON: Coil output ON
Selects the operation output when block
stop is executed.
• On: Retains the on or off status of the coil
used in the operation output of the step,
which was being executed at the time of
block stop.
• Off: Turns off all the coil outputs.
(Operation output by the SET instruction
is retained regardless of the on/off status
of SM1196.)
Qn(H)
QnPH
M9197 SM1197
Switch between
blown fuse and
I/O module
verification error
display
Switches I/O numbers between the fuse-
blown module registers (SD1100 to
SD1107) and I/O module verify error
registers (SD1116 to SD1123) according to
the on/off combination of SM1197 and
SM1198.
Qn(H)
QnPH
M9198 SM1198
M9199 SM1199
Data recovery of
online sampling
trace/status
latch
OFF: Data recovery
disabled
ON: Data recovery
enabled
• Recovers the setting data stored in the
CPU module at restart when sampling
trace/status latch is executed.
• Turn this on to re-execute the sampling
trace or status latch. (Rewriting data
using the programming tool is not
required.)
Qn(H)
QnPH
ACPU
Special
Relay
Special
Relay after
Conversion
Special
Relay after
Modification
Name Meaning Details
Corresponding
CPU
OFF
ON
SM1197
OFF
SM1198
OFF
X/Y0 to 7F0
X/Y800 to FF0
OFF ON X/Y1000 to 17F0
ON ON X/Y1800 to 1FF0
I/O numbers
to be displayed
To Next Page
Loading...
