Mitsubishi Electric Q13UDVCPU - Page 506

504
SM1943
Data logging
setting No.1
Data logging end
OFF: Not ended
ON: Ended
This relay turns on when data logging is
ended.
[Continuous is set for Logging type]
The corresponding bit turns on when data
logging is ended after data have been written
by the number of storable files (Stop is set for
Operation occurring when number of saved
files is exceeded).
[Trigger is set for Logging type]
The corresponding bit turns on when the
trigger condition is met, data are collected by
the number of set times, and then the data
are written to the SD memory card.
This relay also turns on if an error occurs
during data logging (except data logging
error occurred by the execution of online
change).
S (Status
change)
New
QnUDV
LCPU
SM1944
Data logging
setting No.1
Data logging
trigger
OFF  ON:Triggered
• This relay turns on when the specified
trigger condition is met.
• This relay is turned on to meet the trigger
condition.
S (Status
change)/U
New
QnUDV
LCPU
SM1945
Data logging
setting No.1
After data logging
trigger
OFF: Not after trigger
ON: After trigger
This relay turns on after trigger logging is
triggered. This relay remains on even after
data logging is completed. This relay turns off
when trigger logging is suspended or
stopped.
S (Status
change)
New
QnUDV
LCPU
SM1946
Data logging
setting No.1
Data logging
error
OFF: No error
ON: Error
This relay turns on if a data logging error
occurs.
This relay is turned off by the registration of
the setting or a stop command from the CPU
Module Logging Configuration Tool.
S (Error) New
QnUDV
LCPU
SM1947
Data logging
setting No.1
Data storage in
SD memory card
OFF: Not stored
ON: Being stored
This relay is on while buffer memory data are
being stored to a SD memory card by data
logging.
S (Status
change)
New
QnUDV
LCPU
SM1948
Data logging
setting No.1
Data logging file
transfer
execution status
flag
OFF: Not executed
ON: Being executed
• This relay turns on when the data logging
file transfer function is started.
• This relay turns off when the data logging
file transfer function is stopped.
S (Status
change)
New
QnUDV
LCPU
*1
Number Name Meaning Explanation
Set by
(When Set)
Corresponding
ACPU
M9
Corresponding
CPU