52
(2) When the High Performance model QCPU is used
*1 Format ATA cards by a programming tool only. ( Page 240, Section 9.3)
*2 Not applicable to the Q02CPU.
*3 For the writing method to a memory card and USB cables, refer to the following.
Operating manual for the programming tool used
*4 For the GX Works2, GX Developer and GX Configurator versions that can be used with the High Performance model
QCPU, refer to Page 634, Appendix 5.1.
*5 For inquiries and orders of a programming unit (EPU01) and connection cable (EPU20R2CBL), please contact your
local Mitsubishi Electric Engineering Co., Ltd. sales office.
*6 Programming units cannot be used when the "High speed interrupt fixed scan interval" parameter is written to the High
Performance model QCPU whose serial number (first five digits) is “04012” or later.
RS-232 cable
USB cable
(Connector type B)
*2, *3
High Performance model QCPU
Personal Computer
(GX Works2, GX Developer, GX Configurator)
*4
Programming unit, connection cable
*5, *6
Memory card
*1
Memory card
*1
PC card
adapter
To Next Page
Loading...
