Mitsubishi Electric Q13UDVCPU - Page 575

573
APPENDICES
A
Appendix 3 List of Special Register Areas
SD1342
to
SD1349
Protocol
registration
status (for built-
in/adapter serial
communications)
Stores the
protocol
registration
status.
This register stores the presence or absence of protocols
in the protocol setting data registered through the
predefined protocol support function.
If the check result of protocol setting data is abnormal, 0
is stored in all bits.
S (Status
change)
New
LCPU
*1
SD1351
Predefined
protocol function
error code (for
built-in/adapter
serial
communications)
Stores the
error code of
the predefined
protocol
support
function.
This register stores the error code of the predefined
protocol support function.
S (Error) New
LCPU
*1
SD1359
Predefined
protocol setting
data error
information (for
built-in Ethernet
communications)
Stores
information for
identifying the
error location
of protocol
setting data.
The protocol number where an error has been detected
is stored.
• 0: No error
• 1 to 128: Protocol number
• 65535: Unidentifiable
If the value 65535 is stored, the following reasons are
considered.
• The setting that the current version of LCPU does not
support is written.
• The protocol setting data is collapsed.
S (Error) New
QnUDV
*2
LCPU
*3
SD1360
The setting type of the protocol setting data where an
error has been detected is stored. (The value will be
stored only when the written protocol number is within
the range of 1 to 128.)
• 0: Packet setting or component setting
• 1: Protocol detailed setting
• 65535: Unidentifiable
If the value 65535 is stored, the following reasons are
considered.
• The setting that the current version of LCPU does not
support is written.
• The protocol setting data is collapsed.
SD1361
The packet number where an error has been detected is
stored. (The value is stored only when the setting type is
0 (packet setting or component setting).)
• 0: Transmitted packet
• 1 to 16: Received packet number
• 65535: Unidentifiable
If the value 65535 is stored, the following reasons are
considered.
• The setting that the current version of LCPU does not
support is written.
• The protocol setting data is collapsed.
SD1362
The component number where an error has been
detected is stored. (The value is stored only when the
setting type is 0 (packet setting or component setting).)
• 1 to 32: Component number
• 65535: Unidentifiable
If the value 65535 is stored, the following reasons are
considered.
• The setting that the current version of LCPU does not
support is written.
• The protocol setting data is collapsed.
Number Name Meaning Explanation
Set by
(When
Set)
Corresponding
ACPU
D9
Corresponding
CPU
SD1342
SD1343
SD1349
No.16
No.2
No.1
No.32
No.128
No.18
No.114
No.17
No.113
b15 b0b1
No. = Protocol number
to
to
to