To Next PageTo Next PageWhat to do if my Mitsubishi Electric Air Conditioner shows high pressure protection?
If your Mitsubishi Electric Air Conditioner is experiencing high pressure protection issues, examine the refrigerant circuit and ensure the refrigerant amount is correct. Also, inspect the stop valve.
What to do if my Mitsubishi Electric SUZ-KA12NAHZ.TH Air Conditioner displays compressor synchro abnormality?
If your Mitsubishi Electric Air Conditioner is showing compressor synchro abnormality, try reconnecting the connector of the compressor.
What to do for invertor check mode error in Mitsubishi Electric SUZ-KA12NAHZ.TH?
If your Mitsubishi Electric Air Conditioner shows an invertor check mode error, ensure the compressor connector is correctly connected.
What to do if Mitsubishi Electric SUZ-KA12NAHZ.TH Air Conditioner indicates stop valve/ closed valve issue?
If your Mitsubishi Electric Air Conditioner displays a stop valve/closed valve error, check the stop valve.
What causes Pulse Amplitude Modulation protection in Mitsubishi Electric SUZ-KA12NAHZ.TH Air Conditioner?
Pulse Amplitude Modulation (PAM) protection activates in your Mitsubishi Electric Air Conditioner due to instantaneous power voltage drops or when the power supply voltage is high; this is not a malfunction.
General| Category | Air Conditioner |
|---|---|
| Brand | Mitsubishi Electric |
| Model | SUZ-KA12NAHZ.TH |
| Type | Split System |
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 4.0 kW |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Outdoor Unit Dimensions (W x H x D) | 800 x 550 x 285 mm |
| Outdoor Unit Noise Level | 50 dB(A) |
Lists compatible indoor and outdoor unit combinations for different service references.
Identifies and explains the purpose of each component of the outdoor unit.
Details technical specifications including power, dimensions, and refrigerant data.
Provides detailed physical dimensions and required installation space for the units.
Illustrates the electrical connections and component layout for the outdoor unit.
Depicts the refrigerant flow and key components within the outdoor unit's system.
Presents standard operation data, including capacity, input, and temperature readings.
Explains the control logic for fan motor, R.V. coil, and sensor-actuator relationships.
Describes functions like defrost setting and pre-heat control accessible via service menus.
Provides guidance on diagnosing and resolving operational issues and error codes.
Details how to set various unit functions using the remote controller.
Guides on safely disassembling the outdoor unit for maintenance or repair.
