Mitsubishi Electric SW1DNC-MESIF-E - Page 200

7 - 42
7.8 Device Tag Setting
7.8.1 Setting items in Device Tag setting
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
Remark
(1) Creating a user-specified system area
The following explains how to create a user-specified system area in the program
memory of the control CPU.
1 Select [Online] [Format PLC memory] from the menu of GX Developer.
2 As the [Format PLC memory] dialog box appears, select [Create a user setting area]
in [Format Type].
3 Ensure 1K step for [High speed monitor area from other station.] per MES interface
module. *1
4 Clicking the button executes formatting of the PLC memory.
Execution of the PLC memory formatting deletes the programmable controller
CPU data.
Read the programmable controller CPU data into GX Developer before executing
the PLC memory formatting.
Figure 7.31 [Format PLC memory] in GX Developer
Execute
Separately from the areas used by
GX Developer and/or GOT, 1K step
is required per MES interface
module.
*1