Mitsubishi Electric SW1DNC-MESIF-E - Manipulating the Operation Status of the MES Interface Function

7 - 138
7.13 Online - Remote operation
7.13.2 Manipulating the operation status of the MES interface function
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
7.13.2 Manipulating the operation status of the MES interface function
Manipulate the operation status of the MES interface function.
(1) Stop
1 Selecting the [Stop] radio button and clicking the button stops the
operation of the MES interface function.
(1) The following operation also stops the operation of the MES interface
function.
• Click (Stop).
(2) If some job is being executed, the job is canceled.
Section 7.10.5 Setting items for job cancellation
(2) Restart
1 Selecting the [Restart] radio button and clicking the button restarts the
operation of the stopped MES interface function.
The following operation also restarts the operation of the stopped MES interface
function.
• Click (Restart).
Figure 7.107 [Operation]
Execute
Execute