8 - 20
8.6 Importing/Exporting Files
8
DB CONNECTION SERVICE AND SETTING TOOL
(6) Log character code
(Default: ASCII/SJIS)
Specify the character code of the log file (access log, SQL failure log) that is output by
DB connection service in ASCII/SJIS or Unicode.
The specified character code will be enabled after reflecting the settings.
When the setting file exported by using DB Connection Service Setting Tool
version 1.12N or earlier is imported by the version 1.14Q or later, the log character
code will be set to "ASCII/SJIS" (the default).
8.6 Importing/Exporting Files
Import/export files.
(1) Import
Import a saved file.
1 Select [File] [Import] from the menu.
2 The [Open] dialog box is displayed.
Set the following items, then click the button.
When importing a file, use the one that was stored by the export function.
Do not edit any export file.
The setting files exported by using DB Connection Service Setting Tool version
1.14Q or later cannot be used in version 1.12N or earlier.
Figure 8.11 [Open] dialog box
Table 8.8 Setting items in the [Open] dialog box
Item Description
Look in Select the location where the file is stored.
File name Specify the name of the file to be imported.
Files of type
Select a type of the file to be imported.
• DB connection service setting files
To Next Page
Loading...
