7 - 44
7.8 Device Tag Setting
7.8.2 Setting items in Array setting
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
(b) Block
Devices of all tag components are arranged as a block.
The size of the block can be changed in [array block size].
For [array block size], refer to the following.
Section 7.8.3 Setting items in Component setting
Usually, the block size need not be changed because it is automatically adjusted
to avoid device duplication.
(Example) When [Length of array] is set to 4 with [block] setting
Only the start device (device in n=1) need be set.
Devices in and after n=2 are configured automatically.
When device types are different, [block] cannot be selected.
Figure 7.34 When [block] is selected
Component
_
A
Component
_
B
Component
_
C
n=1
n=2
n=3
n=4
D0 D8
D24
D1 to D2
D9 to D10 D25 to D26
D3 to D7
D11 to D15 D27 to D31
D16
D17 to D18
D19 to D23
Block
To Next Page
Loading...
