Mitsubishi A2CCPU User Manual

L-
P
L.
P
P
L..
c-
P
P
P
4. A2CCPU /MELSEC-A
(1) The maximum area that can be usd for fUe register
arm, commont area, status latch area, and sampling
trace
area is 26K bytes (with main program area of 1K
stew).
(2) The areas aHocated to pcmmetw area, TIC setting
value area, and main program area cannot be used for
file register area, comment area, status latch area, or
sampling trace area even when ths A2C runs with
ROM stored programs.
(3) The microcomputer program area can store the follow-
ing utility packages.
Remuk
I
SWlGP-ADS7P X
ADS8 cm k connected to
Ax.
SWOC-PfO
A
SWlGHP-PID
pH) omtion status display is
A
can k connected to AX.
not porrible buw no ADS7
SWOC-UW-FNO
swDoHP-uTLPc-FNo
MUty programs can k storul
0
.
in the microawnputof plog-
0
ram arm (mudmum 14JC
swffiHP-uflp-Fo1
0
For details of utili packages, refer to each utility package
manud.
(4) The file register area is not cleared when the power is
turned ON, the A2C is reset with the RUN key switch,
or latch clear operation is executed.

Mitsubishi A2CCPU Specifications

General

Brand	Mitsubishi
Model	A2CCPU
Category	Controller
Language	English