Mitsubishi F5M42 User Manual

MANUAL TRANSMISSION (E-W) -
Output Shaft <F5M42, W5M42>
22B-8-5
"
D
A
SYNCHRONIZER SPRING INSTALLATION
Install the synchronizer spring securely up to the illustrated
position of t he synchronizer ring.
"
E
A
1ST-2ND SPEED SYNCHRONIZER HUB
INSTALLATION
Install the 1st-2nd speed synchronizer h ub in such a way
that it will be oriented in the direction shown.
Caution
Whenthehubis installed, make sure that the synchronizer
ring is not caught.
"
F
A
SYNCHRONIZER SLEEVE INSTALLATION
(1) Install the synchronizer sleeve in such a way that it will
be oriented in the direction shown.
(2) When the synchronizer sleeve is installed, make sure that
the deep groove portion of the synchronizer hub is aligned
with t h e projecting portion of t h e sleeve.
PWEE9508-E
E
Jun. 1998Mitsubishi Motors Corporation Revised
Synchronizer spring
Rear of
trans-
mission
Identification mark
MD998812
MD998814
MD998825
Synchronizer hub
Rear of trans-
mission
Identification
groove
Synchronizer sleeve
Synchronizer hub

Mitsubishi F5M42 Specifications

General

Brand	Mitsubishi
Model	F5M42
Category	Automobile Parts
Language	English