Mitsubishi FR-A800-E - Page 114

Inspection item
PRECAUTIONS FOR MAINTENANCE AND INSPECTION
113
5
 Removal of the internal fan (upper) (FR-A846-03250(110K) or higher)
(1) Remove the inverter front cover. (Refer to page 15)
(2) Move the fan connector case, and then remove the fan connector.
(3) Remove the installation screws, and then remove the bracket.
(4) Remove the installation screws, and then remove the fan.
 Removal of the internal fan (lower) (FR-A846-03250(110K) or higher)
(1) Remove the inverter front cover. (Refer to page 15)
(2) Move the fan connector case, and then remove the fan connector.
(3) Remove the installation screws, and then remove the bracket.
(4) Remove the installation screws, and then remove the fan.
Fan connector
Connector case
Bracket
Installation screw
Installation screw
Fan
Bracket
Fan connector
Connector case
Bracket
Installation screw
Installation screw
Fan
Bracket