3
INSTALLATION
• The brake unit consists of precision mechanical and electronic parts. Never
install or handle it in any of the following conditions as doing so could cause
an operation fault or failure.
CAUTION
Mount the brake unit and resistor unit to incombustible material.
Installing it to combustible materials directly or near combustible
materials can cause a fire.
Direct sunlight
Vibration
(5.9m/s
2
or more)
High temperature,
high humidity
Oil mist,
flammable gas,
corrosive gas,
fluff, dust, etc.
Horizontal
placement
Vertical mounting
(when mounting
inside an enclosure)
Mounting to
combustible
material
Transportation by
holding the front
cover
To Next Page
Loading...
