39
OPERATION
4.3.6 Alarm history clear
POINT
Set "1"in
ECL Alarm history clear
to clear alarm history.
Operation Display
1. Screen at powering on
The mode is changed to monitor
mode.
2. Press to choose the
parameter setting mode.
3. Press ( ) until
(alarm history clear)
appears.
4. Press to read the currently
set value.
" "(initial value) appears.
5. Press ( ) to change
it to the set value " ".
6. Press to set.
Flicker...Alarm history clear complete!!
• Press ( ) to read another parameter.
• Press to show the setting again.
REMARKS
Refer to page 31
for checking alarm history.
The parameter
number read
previously
appears.
To Next Page
Loading...
