Mitsubishi FR-BU2-H30K - Basic Operation Procedures

31
OPERATION
4.2 Basic Operation
*1 Pressing in the parameter setting mode displays parameter number.
*2 When the written value differs from the current setting value, write is performed.
*3 When the written value is the same as the current setting value, next parameter
number is displayed.
Parameter
number display
At powering on
Monitor mode
Parameter setting mode
*1
Flickers during reset
Regeneration
status display
Alarm history
mode
Past four
alarms history
The latest alarm
is ended by "."
Current
setting
value
display
flickers
*2
*3
Flicker
Next parameter
When no alarm
exists, " " is
displayed.