Mitsubishi FR-BU2-H30K - Page 61

54
OUTLINE DIMENSION DRAWINGS
<FR-BR type>
*1 Ventilating openings are provided on both left and right side surfaces and on the top
surface. The bottom side is open.
*2 The temperature rise of the resistor unit is about a maximum of 100 deg. Therefore, use
heat-resistant wires (such as glass wires) or cover the wires with silicone tubing.
Resistor Unit Type W W1 H H1 H2 H3 D D1 C
Approximate
Mass (kg)
200V
FR-BR-15K 170 100 450 410 20 432 220 3.2 6 15
FR-BR-30K 340 270 600 560 20 582 220 4 10 30
FR-BR-55K 480 410 700 620 40 670 450 3.2 12 70
400V
FR-BR-H15K 170 100 450 410 20 432 220 3.2 1.6 15
FR-BR-H30K 340 270 600 560 20 582 220 4 10 30
FR-BR-H55K 480 410 700 620 40 670 450 3.2 12 70
H3 1
H1 3
(H2)
(40)
33
(H2)
D1
H 5
2- C
Control circuit
terminal
Main circuit
terminal
W1 1(35) (35)
204
Eyebolt
C
C
W1 5
D 5
The FR-BR-55K and H55K are
provided with two eyebolts.
(see below)
(Unit: mm)