Need help?Do you have a question about the Mitsubishi FR-E 500 and is the answer not in the manual?
General| Series | FR-E500 |
|---|---|
| Output Frequency | 0.5 - 400 Hz |
| Protection Class | IP20 |
| Frequency Range | 0.5 to 400 Hz |
| Control Method | V/F control |
| Protection Functions | Overcurrent, Overvoltage, Undervoltage, Overload, Ground fault, Short circuit, Stall prevention, Overheat |
| Protection Features | Motor overload protection |
| Overload Capacity | 150% for 60 seconds |
| Communication Interface | RS-485 |
| Cooling Method | Forced air cooling |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +65°C |
| Humidity | 95% RH or less (non-condensing) |
| Vibration | 5.9 m/s² or less |
To Next Page