128
Calibration parameters
to Refer to , (page 82).
POINT
By setting the Pr. 54 "AM terminal function selection" value, preset Pr. 55 "frequency
monitoring reference" or Pr. 56 "current monitoring reference" to the running
frequency or current value at which the output signal is 5V.
At 5V, the meter generally deflects to full-scale.
♦Related parameters♦
Choosing signal to be output to AM terminal ⇒ Pr. 54 "AM terminal function selection" (refer to
page 90)
Reference values of frequency and current values
⇒ Pr. 55 "frequency monitoring reference",
Pr. 56 "current monitoring reference"
(refer to page 92)
To Next Page
Loading...
